Flotation Equipment - HustonFilterpress

Showing all 8 results

Product Introduction: A self-priming mechanical agitation type BF type mechanical agitation flotation unit that combines pulp suction and non-suction pulp.
Capacity: 0.06～24m3/min
Applications: BF type flotation machine is suitable for the separation of ferrous metals. It can also be used for non-metals such as fluorite and talc. It is more widely used for the separation of gold, silver, copper, iron, tungsten, lead, zinc, tin, molybdenum, nickel, tantalum, niobium, manganese ore and other non-ferrous metals. It can also be used for the rough selection and selection of ferrous metals and non-metals.
Product Improvements: BF type flotation machine models are divided into type I and type II. Type I is an improved design based on the SF type flotation machine and is a suction tank; type II is an improved design based on the JJF type flotation machine and is a direct flow tank. They are usually referred to as BF type flotation machines.

Product Introduction: A flotation machine suitable for coarse and heavy particles.
Capacity: 0.5~38m3/min
Applications: The CLF type coarse particle flotation machine is mainly used to separate non-ferrous and ferrous metals and chemical raw materials. It is suitable for the separation of coarse particles and fine particles.
Product Improvements: The CLF coarse particle flotation machine adopts a new impeller, stator system and a new slurry circulation method to improve the load capacity of mineralized bubbles and the particle size of floated ore particles. The slurry returned to the impeller area has a lower concentration, fine particle size and low power consumption.

Product Introduction: A large full-section air-lift microbubble flotation machine that saves energy by 50-60% and increases flotation recovery rate by 1-5%.
Capacity: 39～780t/d
Applications: Generally, you can choose one full-section airlift microbubble flotation machine for coarse, sweep, and fine selection operations.
Product Improvements: The airlift with a certain pressure is used to stir the slurry. The flotation machine itself has small stirring power and significant energy saving; a high-speed mixing device and atomization device for ore, chemicals and gas are installed;

Product Introduction: A mechanical agitation JJF type mechanical agitation flotation machine that does not absorb slurry and self-aspirates (referring to the design of the American Wimco type flotation machine).
Capacity: 2-20m3/min
Applications: JJF type flotation machine can be widely used for the separation of non-ferrous metals, ferrous metals, and non-metallic minerals, and is suitable for roughing and sweeping operations in large and medium-sized flotation plants.
Product Improvements: The groove shape is shallow, the stator height is lower than the impeller, the slurry circulation volume is large, and the energy consumption is low; the stator is a cylinder with an elliptical hole, which is beneficial to the dispersion and mixing of the slurry and air; it is equipped with an umbrella-shaped perforated dispersion cover to stabilize the slurry surface.

Product Introduction: An inflatable KYF type inflatable agitator flotation machine that does not absorb slurry (referring to the design of Outokumpu OK type flotation machine in Finland).
Capacity: 0.2～38m3/min
Applications: KYF type inflatable mechanical agitation flotation machine (mining flotation machine) is suitable for roughing and selection operations in large and medium-sized mineral processing plants. It can separate non-ferrous metals, ferrous metals and non-metallic minerals. The particle size range of the selected materials is 0.3 ~ 0.01mm (-0.074mm particle size content > 50%).
Product Improvements: KYF type inflatable mechanical agitation flotation machine (mining flotation machine) has two types: U-shaped tank flotation machine and column tank flotation machine.

Product Introduction: A self-priming slurry and self-priming SF type mechanical stirring flotation machine.
Capacity: 0.24～12m3/min
Applications: It can be widely used for the separation of non-ferrous metals, ferrous metals, and non-metallic minerals, and is suitable for roughing and sweeping operations in large and medium-sized flotation plants.
Product Improvements: The impeller of the flotation machine has backward-inclined blades on both sides, which can realize double circulation of the slurry in the tank; the forward-inclined tank body has small dead angles and fast foam movement.

Product Introduction: A self-priming slurry inflatable mechanical agitator XCF type inflatable agitator flotation machine (used as the suction tank of the KYF flotation machine).
Capacity: 0.2～38 m³/min
Applications: It can be widely used for the separation of non-ferrous metals, ferrous metals, and non-metallic minerals, and is suitable for roughing and sweeping operations in large and medium-sized flotation plants.
Product Improvements: The tank body of this machine is the same as that of the KYF flotation machine. The difference is that there is a cover plate above the impeller to form a negative pressure area that can self-prime the slurry, but the power consumption is slightly higher.

Product Introduction: A self-priming mechanically stirred XJB rod flotation machine.
Capacity: 1.5～4 m³/min
Applications: XJB rod flotation machine is suitable for medium and small-sized mineral processing plants to process metal ores with high density and coarse particle size. It can be used in various flotation operations, especially for the separation of lead, zinc, copper, molybdenum, sulfur and silica sand.
Product Improvements: There is a boss between the tank bottom and the rods of this flotation equipment, which acts as a guide and can speed up the speed of the slurry-gas mixture rushing to the bottom of the tank; there is an arc-shaped flow stabilizing plate between the tank bottom and the rods, which can move around the tank body so that it can be evenly distributed in the tank and move in a W-shaped trajectory.