Show sidebar

Cast steel ball

  • Product Introduction: Casting steel balls (casting grinding balls) are made by heating scrap steel, scrap iron and other waste materials using an intermediate frequency electric furnace to fully melt the materials. During the melting process of the materials, an appropriate amount of precious metal alloys (such as ferrochrome, ferromanganese, ferrovanadium, etc.) are added to the furnace. The chemical composition is quenched and tempered inside, and after the temperature of the molten iron reaches above 1550°C and meets the requirements of the process regulations, the qualified molten iron is poured into the steel ball mold or the steel ball production line mold, so that the steel balls smelted through casting are cast steel balls.

coconut shell activated carbon

  • Product Introduction: Huston Coconut Shell Activated Carbon uses imported coconut shells as raw materials and is refined through a special activation process and after air separation, particle cleaning and other treatments. It has uniform particle size, high strength, developed microporous structure, strong adsorption of precious metals, easy analysis and can be regenerated multiple times and used repeatedly. It is especially effective in the carbon slurry gold extraction process.

Forged steel ball

  • Product Introduction: Forged steel balls are steel balls produced by direct high-temperature heating and then forging. Because they do not require melting and casting, they only need to be forged, so they are called forged steel balls.

High chromium cast iron lining plate

  • Product Introduction: The mass fraction of chromium in Huston high-chromium cast iron alloy lining plates is greater than 11%, and the ratio of chromium to carbon content exceeds 4.5. The destructive effect of carbides on the matrix is ​​greatly reduced, so the toughness of Huston high chromium cast iron is better than ordinary white cast iron and low chromium cast iron. By adding other alloying elements and performing appropriate heat treatment, high chromium cast iron can obtain different matrix structures to meet the performance requirements of wear-resistant materials under various working conditions.
  • Product Features: It has excellent anti-wear properties and high-temperature plasticity, high hardness, small hardness gradient, high tempering stability and corrosion resistance.

High manganese steel lining plate

  • Product Introduction: The high manganese steel lining plate of Huston ball mill is used to protect the ball mill barrel from the direct impact and friction of the grinding body and materials. At the same time, different forms of high manganese steel lining plates can also be used to adjust the movement state of the grinding body to enhance the crushing effect of the grinding body on materials, which helps to improve the grinding efficiency of the mill, increase output, and reduce metal consumption.
  • Product Features: High wear resistance, impact resistance, high strength, high toughness, high cost performance and strong adaptability

Manganese steel screen

  • Product Introduction: Manganese steel screen is a metal mesh component used for screening and filtration. It is mostly used in screening, filtration, dehydration, desliming and other operations. The manganese steel screen adopts an embedded weaving method, so the overlapping points of warp and weft are not prominent, the surface is flat, and the force is evenly distributed.

Polyurethane screen

  • Product Introduction: Polyurethane screen plate is one of the most critical components in screening machinery. It is mainly used for material classification, dehydration, demediation and other screening operations. With the continuous progress of the washing industry, the materials used for screen plates range from metal materials to rubber materials, and then to polyurethane materials. It has been used until today and has been recognized by users. It not only has high opening rate, large load-bearing capacity and long service life. Polyurethane screen is a screen made of polyurethane as raw material, cast and fixed.

Rubber lining

  • Product Introduction: The complete set of rubber linings for ball mills consists of end lining plates (grid type is grate plate), end lifting bars, center ring (grid type is center guard plate), fillers, cylinder lifting bars (also called layering bars), cylinder lining plates, manhole doors, fasteners and other parts.
  • Product Features: Low energy consumption, high wear resistance, impact resistance, low noise, easy to install, easy to install, and save steel balls.

Wet wear-resistant rubber sheet

  • Product Introduction: High-resistant rubber sheets are Huston’s domestically mature “liquid nanoformula • room temperature high-frequency curing” rubber-making process developed through continuous exploration and research. This rubber-making process broke the foreign monopoly of China in the field of liquid rubber-making for more than 80 years, and was successfully included in the Yantai Science and Technology Development Plan by the Yantai Science and Technology Bureau.
  • Product Features: This wear-resistant rubber is at the international level in terms of wear resistance, resilience, and tear resistance. Its wear resistance index reaches 128%, rebound reaches 80%, tensile strength reaches 23.5MP, and tear strength reaches 168N/mm.