Show sidebar

Bearing

  • Product Introduction: Bearing is an important component that supports mechanical rotation. It can effectively reduce the friction coefficient during its movement and ensure the accuracy of rotation. The bearing is mainly composed of an inner ring, an outer ring, rolling elements and a rolling element cage. The inner ring is tightly sleeved on the journal and rotates with the shaft. The outer ring is installed in the bearing seat hole. There are raceways on the outer circumference of the inner ring and the inner circumference of the outer ring. When the inner and outer rings rotate relative to each other, the rolling elements roll on the raceways of the inner and outer rings. They are separated by cages to avoid mutual friction.

Electric drum

  • Product Introduction: The electric drum is actually a power device. It is a new type of drive device that places the motor and reducer inside the drum body, replacing the traditional separate drive device with the motor and reducer outside the drive drum.

Electric Motor

  • Product Introduction: The motor converts electrical energy into mechanical energy, generates driving torque, and serves as a power source for electrical or mechanical equipment. An energized coil creates a rotating magnetic field that drives the rotor.

flotation machine impeller

  • Product Introduction: The impeller is a key component of the mechanical agitation flotation machine. The impeller is responsible for stirring and circulating the slurry, and sucking in and dispersing air. The impeller of the flotation machine is made of high-strength rubber, which has a long service life and is wear-resistant and corrosion-resistant.
  • Product Features: Tough, wear-resistant, oil-resistant, water-resistant, anti-enzyme bacteria, good elasticity, high impact strength.

gear

  • Product Introduction: The gear is an accessory of the transmission device. Through the gear, the motion and power between any two axes can be transmitted (the rotation of one axis is transmitted to the other axis), and actions such as deceleration, speed increase, direction change and reversal can also be achieved.

Mixing tank impeller

  • Product Introduction: The impeller of the mixing tank is the key component of the mixing tank, which is mainly composed of several curved blades. The impeller of the mixing tank is located at the lower mouth of the cylinder. The slurry and chemicals are added into the circulating cylinder with an empty suction pipe for stirring.
  • Product Features: The impeller can be made into rubber impeller or various steel impellers according to the user’s needs. In addition, the relative positions of the motor, ore feeding port, ore discharge port, etc. can also be configured according to user requirements.

Polyurethane flotation machine rotor stator

  • Product Introduction: The polyurethane flotation machine rotor and stator has both the high strength of plastic and the high elasticity of rubber. It is a new type of wear-resistant flotation machine rotor and stator with excellent comprehensive performance.
  • Product Features: High wear resistance, high wear resistance, corrosion resistance, longer life, reducing the number of replacements of cast iron and rubber impeller covers.

Reducer

  • Product Introduction: The reducer is a device that reduces the mechanical speed. It is an independent component consisting of a gear rotation and a worm rotation enclosed in a steel shell. The purpose of deceleration is achieved by passing the motor or other high-speed running power through the gear with a small number of teeth on the input shaft of the reducer and meshing with the large gear on the output shaft.
  • Product Features: Reduce the speed and obtain large torque to make the equipment have better operating characteristics; it can reduce the rotational inertia and control start, stop and speed changes in a timely manner; it has the function of protecting the motor.

Rubber flotation machine rotor stator

  • Product Introduction: The rubber-lined flotation machine rotor and stator are the central accessories of the flotation machine. It is made of steel as the skeleton material, rubber with excellent wear-resistant, anti-corrosion and oil-resistant properties as the wear-resistant layer, and compounded by a special vulcanization process using high-performance adhesive. The rotor and stator produced by Huston has good wear resistance, impact resistance, tear resistance and chemical stability.