Hydrocyclone group

The Huston cyclone group can be equipped with a hierarchical automatic control system, which sets parameters according to the characteristics of ferrous, non-ferrous metals and chemical minerals, non-metallic minerals, building materials minerals, etc., and detects and automatically adjusts the liquid level of the pump pool and the flow rate, outlet pressure, slurry concentration, motor speed, etc. of the slurry pump to ensure the stability of the cyclone inlet indicators. Adjust the parameters based on the measurement feedback data of the cyclone overflow concentration and flow rate, so that the indicators are always within the required range. Huston cyclone group can meet the ore demand of large mines. It can customize the cyclone group for users. The cyclones are selected and the number of cyclones is determined according to different feed particle sizes, underflow concentrations and production volumes. Its classification efficiency is 20-30% higher than that of spiral classifiers, and can reach 70-85%. In addition, the Huston cyclone group is combined with other equipment into a classification equipment group, which can increase the processing capacity of the mill by more than 15%. The multi-functional screen, one of the combined equipment, can automatically return the coarse particles in the overflow to the mill.

A gold mining plant in Yunnan found that although the classification efficiency of pre-selection work was high, the classification effect was poor, the plant area was limited, and the cost remained high. After repeated discussions and selections, Huston’s hydrocyclone group was finally selected. Although the output has declined, it fully meets the needs of the dressing plant. Moreover, the Huston classification cyclone group is made of good material and has low wear. At the same time, the gapless gate valve developed by Huston Mining is installed at the ore feed port of each unit. The valve operates reliably, has small movement resistance, and the valve space is very small, reducing the diameter of the entire cyclone group. Ultimately, we achieve the goals of reaching standards, production and basic cost control.