Crushing and Screening
Grinding and Classification
Mining Process
Thickening and Dewatering
Auxiliary
Consumables and Spare Parts
SKU:
XH-PJC
Category: Agitation Equipment
Ordinary mixing tank
- Product Introduction: A traditional slurry mixing tank
- Capacity: 0.0785～45m3
- Applications: Ordinary stirring tanks are mainly used to stir the slurry before flotation operations to fully mix the chemicals and slurry. It can also be used in slurry mixing in chemical and building materials industries and in industrial sectors such as cyanide plants and sewage treatment plants.
- Product Improvements: The cylinder of Huston ordinary mixing tank can be lined with wear-resistant and anti-corrosion rubber lining, which can effectively extend the service life of the equipment. Its application field can be extended to the mixing of abrasive and corrosive slurries.
Advantages and Features
- The cylinder can be lined with high wear-resistant rubber, which has strong anti-corrosion and wear resistance
- the impeller design has strong slurry stirring ability
- stable operation and easy maintenance.
Working Principle
Under the rotation of the blade impeller, the stirring tank is discharged from the lower end of the impeller along the axial direction, forming a negative pressure in the impeller cavity, so that the slurry flows from the top of the stirring tank impeller into the impeller cavity for replenishment. At the same time, under the diversion effect of the flow stabilizing plate, the slurry forms a vertical circulating flow in the tank with the center downward and the surrounding upward. When the upflow velocity of the slurry is greater than the settling velocity of the mineral particles, the mineral particles in the slurry will be suspended and maintain a uniform concentration.
Technical Specifications
| Model | Effective volume (m3) | Impeller speed (r.p.m) | Impeller diameter(mm) | Motor model | Motor power(kw) | Weight(kg) |
|---|---|---|---|---|---|---|
| BJ-500X500 | 0.0785 | 493 | 160 | Y80L-4 | 0.55 | 120 |
| BJ-750X750 | 0.25 | 530 | 240 | Y100L-6 | 1.5 | 240 |
| BJ-1000X1000 | 0.58 | 530 | 310 | Y100L-6 | 1.5 | 680 |
| BJ-1500X1500 | 2.2 | 320 | 400 | Y132S-6 | 3 | 790 |
| BJ-1600X1800 | 2.6 | 331 | 400 | Y132M2-6 | 5.5 | 990 |
| BJ-2000X2000 | 4.4 | 230 | 550 | Y132M2-6 | 5.5 | 1800 |
| BJ-2000X2500 | 5.9 | 230 | 630 | Y160M-6 | 7.5 | 2106 |
| BJ-2500X2500 | 9.2 | 230 | 630 | Y160M-6 | 7.5 | 2766 |
| BJ-3000X3000 | 14.8 | 210 | 700 | Y225S-8 | 18.5 | 4613 |
| BJ-3500X3500 | 24 | 230 | 850 | Y225M-8 | 22 | 5980 |
| BJ-4000 X 4000 | 45 | 153 | 1000 | Y250M-8 | 30 | 8910 |
Case Study
The ore hardness of an iron ore concentrator in Shaanxi is relatively high. During the mixing process before flotation, the abrasion of the mixing tank is relatively large. Equipment replacement is frequent, which increases a lot of costs. The factory has been struggling to find a mixing machinery and equipment with good wear resistance. After many consultations, we came to Huston Mining for purchasing. Huston’s mixing tank cylinder is lined with wear-resistant rubber plates, which greatly extends the service life and saves costs for the factory. Today, Huston’s ordinary mixing tank has been operating in the factory’s production line for five years and is still used in the production line.
Product Inquire Now
"*" indicates required fields